| title: | linux dvb DViCO FusionHDTV DVB T Lite |
|
Hi,
I am trying to get my dvb card running but i just doesnt work and I am
running out of ideas. Im using gentoo and tried the current kernel
which is 2.6.13-gentoo-r5 and also 2.6.11 with patches.
The latest attempt was to get 2.6.14.2 kernel sources, apply the
v4l-kernel and dvb-kernel CVS sources and build everything like its
described in rel="nofollow" linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS .
I am sure that the card has a Thomson 7579 tuner rather than a Philips.
Its written on the can: DTT 7579
This is an Australian card and were using PAL over here.
This is what happens:
# modprobe bttv
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:09.0[A] - Link [LNKB] - GSI 5 (level, low) - IRQ 5
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 5, latency: 32, mmio: 0xdf002000
bttv0: detected: DViCO FusionHDTV DVB-T Lite [card=128], PCI subsystem ID is 18ac:db10
bttv0: using: DViCO FusionHDTV DVB-T Lite [card=128,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=-1
bttv0: add subdevice "dvb0"
# modprobe dvb-bt8xx
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:09.1[A] - Link [LNKB] - GSI 5 (level, low)
- IRQ 5
bt878(0): Bt878 (rev 17) at 00:09.1, irq: 5, latency: 32, memory:
0xdf000000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
I tried modprobe bttv tuner=42 but the result is the same:
linuxtv-dvb-apps-1.1.0/util/szap/tzap "Digital"
using /dev/dvb/adapter0/frontend0 and /dev/dvb/adapter0/demux0
tuning to 177500000 Hz
video pid 0x0601, audio pid 0x0602
status 00 | signal 90ef | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal a6bf | snr bfbf | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal a6bf | snr c2c2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
and so on..
but cat /dev/dvb/adapter0/dvr0 is just empty
Any Ideas how to get that thing running?
Here are some more outputs:
# lspci -v
0000:00:09.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
Subsystem: DViCO Corporation: Unknown device db10
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at df002000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
0000:00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
Subsystem: DViCO Corporation: Unknown device db10
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at df000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
# lsmod
Module Size Used by
dvb_bt8xx 12292 0
nxt6000 7172 1 dvb_bt8xx
mt352 5892 1 dvb_bt8xx
dvb_pll 8708 1 dvb_bt8xx
sp887x 7492 1 dvb_bt8xx
dst_ca 15808 1 dvb_bt8xx
dst 24964 2 dvb_bt8xx,dst_ca
bt878 8120 2 dvb_bt8xx,dst
dvb_core 75944 2 dvb_bt8xx,dst_ca
cx24110 7812 1 dvb_bt8xx
or51211 9348 1 dvb_bt8xx
lgdt330x 7388 1 dvb_bt8xx
bttv 156496 2 dvb_bt8xx,bt878
video_buf 17284 1 bttv
compat_ioctl32 896 1 bttv
i2c_algo_bit 8776 1 bttv
v4l2_common 4544 1 bttv
btcx_risc 3784 1 bttv
tveeprom 12816 1 bttv
videodev 7232 1 bttv
tuner 43300 0
i2c_core 17744 12
dvb_bt8xx,nxt6000,mt352,sp887x,dst,cx24110,or51211,lgdt330x,bttv,i2c_algo_bit,tveeprom,tuner
Cheers,
Tom
--
Alexander Graham Bell is alive and well in New York, and still waiting
for a dial tone.
|
